HAZARDOUS WASTE CONTAINERS COMPLIANT
Installable unit fon the temporary storage of liquid hazardous wastes Class l and II with individually defined hazandous chanacteristics, intransport packaging.
FRAMEWORK:
Cold-rolled, welded 3mm thick steel sections. Steel quality: St 37.
FLOOR:
Cross- and lengthwise support mádé of 2 or 4mm thick U-sections 12mm layered wooden floor Alternatively: 3-4mm ribbed steel sheet
ROOF:
Self-supporting sheets with crosswise notches, 1.5mm wide notch:11mm
CORNER PILLARS
Cold-rolled, made of 3mm thick steel sections
WALLS:
Side walls: steel sheet with lengthwise notches, 1.5mm wide notches: 35 mm, 4 vént openings diagonally under the roof edge
DOORS
Double doors, lockable from outside 10': 2 locking bars 20': 2 locking bars Alternatively: -supplementary door security system -only one bar with supplementary internál bascule bolt
CONTAINER CORNERS
Dimensions in compliance with ISO standard, welded, Bmm thick, steel quality: St 37
In the course of designing the container suitable fór the collection and temporary
storage of packaging used fór the transporting of hazardous waste, we took into
consideration áll aspects of the regulations set forth Ín Exhibit 10 tó Government
Decree 102/1996 (July 12] regarding hazardous wastes.
Therefore, in addition to being in compliance with relevant terms
concerning temporary storage, it can alsó be assured that accidental damage
to the packaging materials will not lead to environmental contamination due to
leaking hazardous wastes.
The design of the container for the temporary storage of transport packaging
containing hazardous wastes is based on standard moving containers.
The container is closed, with solid walls and a double door ön one end opening outwards.
The bottom is a salvager appropriate fór the collection of liquids, from which the substance
can be drained by means of the táp located ön the left hand side of the container.
The removable floor of the salvager is ribbed, mádé of welded concrete steel with galvanising.